H3C 胖AP设置（VLAN模式）——高级配置

恢复出厂reset saveThe saved configuration file will be erased. Are you sure? [Y/N]:yConfiguration file in flash is being cleared.Please wait …….Configuration file is cleared.rebootStart to check configuration with next startup configuration file, please wait………DONE!This command will reboot the device. Current configuration will be lost, save current configuration? [Y/N]:nThis command will reboot the device. Continue? [Y/N]:y#Nov 24 03:03:52:580 2014 WA2620i-AGN DEVM/1/REBOOT:Reboot device by command.

配置交换机名称sysSystem View: return to User View with Ctrl+Z.[WA2620i-AGN]sysname IT-WA2620-3

配置管理地址interface Vlan-interface1ip address 172.16.1.10 255.255.255.0

配置管理员账号及密码，为该用户开启telnet、con、web服务[IT-WA2620-3]local-user admin[IT-WA2620-3-luser-admin]password cipher 12345678[IT-WA2620-3-luser-admin]service-type telnet terminal[IT-WA2620-3-luser-admin]service-type web

配置con接口与telnet[IT-WA2620-3]user-interface con 0[IT-WA2620-3-ui-console0]authentication-mode scheme[IT-WA2620-3-ui-console0]quit[IT-WA2620-3]user-interface vty 0 4[IT-WA2620-3-ui-vty0-4]authentication-mode scheme[IT-WA2620-3-ui-vty0-4]quit

配置SSH(最好逐行复制输入，中间有对话框，不要全部复制粘贴)ssh server enablepublic-key local create rsa1024
user-interface vty 0 4authentication-mode schemeprotocol inbound sshquit
local-user adminservice-type sshauthorization-attribute level 3quitssh user admin service-type stelnet authentication-type password

配置用户之间不隔离undo wlan-client-isolation enable

添加缺省路由ip route-static 0.0.0.0 0.0.0.0 172.16.1.1

配置SNMPsnmp-agentsnmp-agent community read publicsnmp-agent sys-info version all

配置NTPntp-service unicast-server 210.72.145.44ntp-service unicast-server 202.120.2.101

配置上行链路为Trunkinterface g1/0/1port link-type trunkport trunk permit vlan all

配置需要通过VLANvlan 10Description Server-Lanvlan 20Description Desktop-Lanvlan 30Description Laptop-Lanvlan 40Description Guest-Lan。。。

配置多VLAN无线接口interface WLAN-BSS 11port link-type accessport access vlan 30
interface WLAN-BSS 12port link-type accessport access vlan 30
interface WLAN-BSS 13port link-type accessport access vlan 40
interface WLAN-BSS 14port link-type accessport access vlan 40

配置模板与SSID参数（通常所谓的AES加密）wlan service-template 11 cryptossid YYE5G-H3Ccipher-suite tkipsecurity-ie rsn
wlan service-template 12 cryptossid YYE-H3Ccipher-suite tkipsecurity-ie rsn
wlan service-template 13 cryptossid Guest5G-H3Ccipher-suite tkipsecurity-ie rsn
wlan service-template 14 cryptossid Guest-H3Ccipher-suite tkipsecurity-ie rsn
interface WLAN-BSS 11port-security port-mode pskport-security tx-key-type 11keyport-security preshared-key pass-phrase simple 12345678
interface WLAN-BSS 12port-security port-mode pskport-security tx-key-type 11keyport-security preshared-key pass-phrase simple 12345678
interface WLAN-BSS 13port-security port-mode pskport-security tx-key-type 11keyport-security preshared-key pass-phrase simple 12345678
interface WLAN-BSS 14port-security port-mode pskport-security tx-key-type 11keyport-security preshared-key pass-phrase simple 12345678

配置开放SSID（举例）wlan service-template 1 clearssid H3C

配置射频绑定SSID、模板、信道[IT-WA2620-3]interface WLAN-Radio1/0/1[IT-WA2620-3-WLAN-Radio1/0/1]service-template 11 interface wlan-bss 11[IT-WA2620-3-WLAN-Radio1/0/1]service-template 13 interface wlan-bss 13[IT-WA2620-3-WLAN-Radio1/0/1]interface WLAN-Radio1/0/2[IT-WA2620-3-WLAN-Radio1/0/1]service-template 12 interface wlan-免费云主机域名bss 12[IT-WA2620-3-WLAN-Radio1/0/1]service-template 14 interface wlan-bss 14[IT-WA2620-3-WLAN-Radio1/0/1]channel 6

清理默认模板H3C[IT-WA2620-3]interface WLAN-Radio1/0/2[IT-WA2620-3-WLAN-Radio1/0/2]undo service-template 1[IT-WA2620-3-WLAN-Radio1/0/2]quit[IT-WA2620-3]undo wlan service-template 1[IT-WA2620-3]undo interface WLAN-BSS32[IT-WA2620-3]undo interface WLAN-BSS33

启用模板（放出SSID信号）wlan service-template 11 cryptoservice-template enablewlan service-template 12 cryptoservice-template enablewlan service-template 13 cryptoservice-template enablewlan service-template 14 cryptoservice-template enable

相关推荐: linux如何查看文件夹多大

这篇文章主要介绍“linux如何查看文件夹多大”的相关知识，小编通过实际案例向大家展示操作过程，操作方法简单快捷，实用性强，希望这篇“linux如何查看文件夹多大”文章能帮助大家解决问题。 方法：1、利用ls命令查看，该命令可将结果以KB、MB等为单位进行显示…